Products
Product Directory
Explore Koiden Technologies’ range of battery, EV, energy storage, and industrial components. Filter by category, product type, and application, then send a bulk enquiry.
29 products
3.7V DMEGC 18650 Li-Ion Cells
High-rate 18650 Li-ion cell for e-mobility packs.
- 2650mAh+
- 3C EV Grade
- 200 cells/box
3.7V NORDA 18650 Li-Ion Cells
High-rate 18650 Li-ion cell with low internal resistance.
- 2650mAh+
- IR 11–13 mΩ
- 200 cells/box
21700 Li-Ion Cells
Higher-capacity 21700 cylindrical cell for e-mobility.
- 4500mAh+
- 3C EV Grade
- 200 cells/box
HX 32700 LFP Cells
High-capacity 32700 LFP cell for energy storage.
- 6000mAh+
- IR 5–7 mΩ
- 100 cells/box
CBAK 32140 LFP Cells
15Ah LFP cell rated for 2,500 life cycles.
- 15.5Ah+
- A6/A7 Grade
- 2,500 cycles
JSK 32140 LFP Cells
15Ah A-Grade LFP cell for energy storage systems.
- 15.5Ah+
- A Grade
- 1,500 cycles
Prismatic LFP Cells
100Ah prismatic LFP cell built for long cycle life.
- 105Ah+
- 4,000 cycles
- 3C EV/ESS
JBD 16S 80A NMC Hardware BMS
16S 80A hardware BMS for NMC e-mobility packs.
- 16S
- 80A
- NMC
JBD 8S 60A–150A BMS
8S 24V hardware BMS with up to 150A continuous current.
- 8S / 24V
- up to 150A
- LiFePO4
JBD 4S 50A–120A LiFePO4 BMS
4S LiFePO4 BMS for small energy storage and portable power.
- 4S
- 50–120A
- LiFePO4
JBD 7S–24S 40A–80A Smart BMS
Bluetooth-enabled smart BMS for 24V–80V e-mobility packs.
- 7S–24S
- 40–80A
- Bluetooth
JBD 10S–17S 20A–120A Smart BMS
Auto-detecting smart BMS spanning 10S–17S configurations.
- 10S–17S
- 20–120A
- Bluetooth
DALY Smart BMS
Cloud-connected smart BMS for 4S–24S multi-chemistry packs.
- 4S–24S
- Bluetooth + IoT
- CAN/RS485
DALY M Series BMS
High-current BMS built for golf carts and utility vehicles.
- 3S–24S
- 150–200A
- Waterproof
DALY G Series BMS
Compact standard BMS for light e-mobility applications.
- 3S–13S
- 15A / 20A
DALY H Series BMS
Rugged standard BMS with a full protection suite for 18650 packs.
- 3S–16S
- 40A / 60A
DALY K Series BMS
Standard BMS built for AGV and industrial e-mobility packs.
- 3S–24S
- 40–100A
Nickel Plated Strips
Nickel strip stock for spot-welded cell interconnects.
- 0.12 / 0.15mm
- 5–15mm width
H-Type Nickel Strips
H-pattern nickel strips for multi-cell interconnection.
- 32700 / 32140 / 18650 / 21700
- 0.12 / 0.15mm
Cell Holders
Cell holders and spacers for consistent pack alignment.
- 32700 / 32140 / 18650 / 21700
- 1×1 / 1×2 / 1×3
SB50 Connector
Anderson SB50 power connector housing set.
- SB50 Gray Housing
Battery Housing
Housings and enclosures to contain and protect packs.
Housing Handles
Handles and grips for carrying and mounting housings.
Kapton Tape
Polyimide insulation tape for electrical protection.
- 12 / 24 / 48mm
PVC Sleeves
PVC sleeving for cell and pack insulation.
- 30–630mm
Heat Shrink Tubes
Heat-shrink tubing for terminal and cable insulation.
- 5–15mm
- 100m rolls
Epoxy Sheets
Rigid epoxy sheets for structural insulation.
- 0.5–2mm
Barley Paper
Insulation paper for cylindrical cell protection.
Two-Sided Foam Tape
Double-sided foam tape for mounting and cushioning.